Job Description
Drive a tractor/trailer within a 600-mile a day distance.
Climbing into and out of the cab at various inspections and servicing points, as well as loading and unloading points.
Keep detailed records on all travel and activity as required by the employer and the Department of Transportation. (DOT)
The driver will be responsible for chaining tires during extreme weather conditions.
The driver will be required to connect various electrical cords and pneumatic hoses from the trailer to the tractor.
May perform minor mechanical repair work while on the road such as adjusting brakes, checking oil or refueling ·as needed.
Throwing wrappers over the load of logs and connecting them together with binders to ensure that the logs stay on the truck.
APPLY NOW
Sitting – The driver will sit 80% of the time on duty. This primarily occurs in the cab of the vehicle while driving extended distances. The driver is required by DOT to rest at least 10 hours out of each 24 hour period. Total driving time cannot exceed 11 hours in that same 24 hour period. The type of seat the driver sits upon in the vehicle is an air-cushioned seat that has an adjustable seat back and also adjusts front and back. The driver will not sit for more than 2 hours at any given stretch, per DOT regulations for load securement.
Standing – Standing time for a worker is limited to those periods he/she is waiting for a load to be loaded or unloaded, or when the truck is being fueled or otherwise serviced. At such times the worker might stand on dirt or gravel and uneven surfaces for several hours at a time. However, a worker is afforded the opportunity to sit as desired to watch the truck being loaded or unloaded or serviced.
Walking – The worker will encounter asphalt, dirt and gravel, as well as uneven surfaces, while making safety inspections, loading or unloading and truck refueling. The amount of walking.and the distance walked will vary depending on each individual worker. A worker will probably walk approximately 1 hour a day in performing the tasks of this job.
Bending – A worker may bend on an average of 1 to 4 times for every hour. A worker mp.y bend from their waist or knees, as they so desire. A worker may also alternate bending with squatting, if this is not contraindicated. Bending would occur while inspecting tires for vehicle condition and care of the unit: Bending would also occur when tightening down ties on loads, picking up tie-down material, adjusting brakes, etc. Bending would occur several times a day, depending on the amount of loads-hauled.
Squatting – Squatting may occur 1-15 times.during a worker’s shift. Squatting would mainly occur when tightening ties or after a worker has arrived at his/her destination and loosened the ties. A worker’s average drive is 2 hours per load.
Crawling – Crawling may be done by the worker while adjusting his/her brakes. The duration should be no more than 10 feet at a stretch.
Climbing – A worker is required to climb in and out of the truck several times a day. This is done with the 3 point system, the driver always having their hands on a stable hand-hold at all times. The distance the worker is required to step is 1 foot from the ground to the first step.
Reaching – The distance a worker will reach is that of arms length when driving, performing any minor repairs, connecting the trailer air and electric lines to the back of the truck, installing tire chains, reaching up to connect the ties to secure the load. The worker is required to reach while grasping handles to enter or exit the truck cab. This may occur many times during the normal work day, the amount depends on the length of duty and the number of loads.
Twisting – An individual is not required to twist in this job if he/she utilizes proper body mechanics to pivot.
Lifting/Carrying – A worker will throw a tie-down, weighing 9.5 pounds over the load that is 14 feet high or less. Each load requires 4 tie-downs. Each tie also requires a binder that weighs 7.5 pounds that must be lifted up to about 1.5 feet over the workers head. The amount of times a worker would throw the ties would depend on how many loads that worker hauled in a day. The average amount of loads is 2 so the worker would be expected to throw the tie-downs at least 8 times in one day. While carrying the worker must be able to lift tire chains from the chain rack on the truck enough to free them. This should only be to about waist level, the chains weighing 75 pounds or less. These may be carried for at least 10-65 feet.
Pushing/Pulling – A worker must be able to exert 1-5 pounds of pressure to connect air ·lines by pushing them into their receptacle. The driver will need to exert this much pushing and pulling pressure to steer the vehicle, shift gears, and operate the truck and tractor protection valves.
Arms/Hands – A worker will utilize his/her arms and hands upwards of 60 times during a shift. Shifting gears would occur primarily with the right hand, but both hands would be used for steering of the vehicle. It is expected that most likely the worker will use his hand of dominance for writing and for any of the inspections, etc.
Legs/Feet– Legs/feet would be utilized greater than 60 times during a work shift. An individual uses both feet to operate the vehicle gas, brake, clutch and accelerator. Both legs and feet are needed in the walking and standing duties mentioned earlier.
...This is a hybrid role, reporting to our office in West Los Angeles four days per week. About the Role We are looking for a Social Media Manager with deep expertise of all social platforms to engage with our audience and own all social media campaigns. Ideally,...
...? We can show you how to earn more with Senior Life Insurance Company. Our systems and processes are designed with the agent in mind... ...Conditionals Accepted Live Training Daily Pay SCHEDULE A CONFIDENTIAL INTERVIEW TODAY Powered by JazzHR QCWCMlOKHj...
...team member in a culture that values safety, integrity, teamwork and results. Technique, Inc is currently looking for an Exhaust Model Maker who will ensure quality in all products produced in the exhaust business assembly unit. Job Responsibilities Understanding...
...flexible remote position that allows for work-life balance while offering the... ...interactions. Qualifications: No prior experience necessary; we offer comprehensive training.... ...commissions. Flexibility to work from home, promoting a healthy work-life balance....
Make a Difference on Your Own Schedule and Terms! Hiring Personal Care Attendants in Kentucky Professional Case Management, the leader in home healthcare, is now hiring Personal Care Attendants (PCAs) to provide in-home healthcare services to help those who have served...